Compare dashcam parking modes

Compare power draw and startup times for different cameras and parking modes.

Loading measurements…

Parking modes explained

Some modes save video after an event. Others record continuously or wait in a low-power state until they're triggered.

Non-buffered parking recording

Recording starts after an event, so there's no video from before the trigger. In impact-detection modes, the G-sensor can wake the camera to start recording. These modes often use less power, but not always.

Buffered parking recording

The camera continuously watches for motion or impacts and saves video from before and after the event. Modes can detect motion, impacts, or both.

Continuous recording

Time-lapse creates sped-up video without audio. Low-bitrate recording saves continuous, normal-speed video with audio, sometimes at a reduced frame rate.

Radar can wake recording when something approaches. Hybrid parking modes switch or combine recording modes.

Choose cameras

Choose cameras and a parking mode to compare their power draw and startup times.

Compare the same parking mode and camera setup. Startup time means impact to the first recorded frame when the test documents that timing. Other startup measurements are labeled separately.

Compare different models 0 / 4

Select up to four measurements below. Selections remain when you change filters and travel with the shared link.

Loading measurements…

Loading measurements and source index…

Original testing data

See the original test posts and charts for more detail.

Vortex Radar's measurements were provided privately. The original spreadsheet isn't public.

Download the comparison data: JSON · Full CSV · Methodology and data format.